Sawdust Charcoal Production Line

01/04/2025Charcoal machine Sawdust Charcoal Production Line430

What is sawdust charcoal production line?

Sawdust charcoal production line is a complete system of equipment for converting sawdust and other biomass raw materials into high quality charcoal.

Get a free quote

Phone/WhatsAPP

What is sawdust charcoal production line?
Sawdust charcoal machine introduction
Mechanism charcoal machine working principle
Carbonization effect
Scope of use of sawdust briquetting machine
Parameter table of wood chip charcoal making machine
Sawdust charcoal machine equipment features
What are the considerations for buying sawdust charcoal production line?

Sawdust charcoal machine introduction

Sawdust charcoal production line is a complete system of equipment for converting sawdust and other biomass raw materials into high quality charcoal. The production line usually includes the following main equipment:

Sawdust crusher: crushes wood into sawdust with diameter less than 5mm.
Dryer: Reduce the moisture content of sawdust to 10%-12% by hot air or airflow drying technology.
Carbonization Furnace: Carbonization is carried out at a high temperature of 300-400°C to convert sawdust into charcoal.
Cooling device: cool and pack the charcoal after carbonization.
Auxiliary equipment: such as flue gas purifiers, dust collectors, waste oil recovery devices for environmental protection and resource recovery.

Some of the production lines are also equipped with fully automatic control systems, which can adjust the equipment parameters in real time to improve production efficiency and product quality.

Mechanism charcoal machine working principle

The workflow of sawdust charcoal production line is as follows:

Raw material pre-processing: Sawdust is pulverized by crusher to appropriate particle size and moisture content is reduced by dryer.
Carbonization process: The dried sawdust enters into the carbonization furnace and is heated to 300-400℃ under anoxic conditions, where pyrolysis reaction occurs to produce charcoal.
Cooling and Packing: The carbonized charcoal is cooled down by the cooling device and then packed for easy storage and transportation.

Part of the production line is a continuous process with automated production by means of a drum-type carbonization furnace, which reduces manual intervention.

Carbonization effect

Sawdust charcoal production line can efficiently convert sawdust into high quality charcoal, and its features include:

HIGH DENSITY: Charcoal is dense and burns for a long time, replacing coal and firewood.
Low moisture content: the moisture content of the finished charcoal is less than 12.1%, ensuring the combustion efficiency.
Environmental protection: the smoke generated in the production process is purified and treated to reduce air pollution.

Scope of use of sawdust briquetting machine

Sawdust charcoal production line is suitable for many kinds of biomass raw materials, including: sawdust, rice husk, coconut shell, bark, crop straw, fruit kernel, etc. All these raw materials can be used for the production of charcoal after crushing and drying.

Parameter table of wood chip charcoal making machine

The technical parameters of the sawdust charcoal production line vary depending on the model of the equipment, and the following are common parameters:

yield	Small-sized production line with a daily output of 50 tons, medium-sized production line with a daily output of 100 tons, large-sized production line with a daily output of 500 tons
temperature range	Carbonization furnace temperature control at 300-400 ° C
power consumption	Adopt energy-saving design, use exhaust gas to heat and dry materials, reduce energy consumption
Equipment Size	Depending on the scale of production, the volume and footprint of the equipment varies.

Sawdust charcoal machine equipment features

Sawdust charcoal production line has the following significant advantages:

High efficiency and energy saving: adopting advanced pyrolysis technology and energy-saving design to reduce production cost.
Environmentally friendly: no harmful gas emission during the production process, in line with environmental requirements.
High degree of automation: equipped with fully automatic control system and IOT monitoring system, reducing manual intervention.
Strong applicability: it can process a variety of biomass raw materials and adapt to different production needs.
High economic benefits: charcoal as a clean energy, high market demand, high profit margin.

What are the considerations for buying sawdust charcoal production line?

You need to pay attention to the following points when buying sawdust charcoal production line:

Raw Material Selection – Ensure that raw materials are adequate and of consistent quality;
Moisture Control – The moisture content of raw materials should be controlled between 10% and 12%;
Equipment Configuration – Select the appropriate machine model according to the production requirements;
Environmental performance – ensure that the machine is equipped with flue gas recovery and treatment;
Operator training – provide professional training for operators;
After-sales service – choose a supplier that provides installation, commissioning and maintenance services;
Energy efficiency – selecting energy efficient equipment to reduce production costs;
Market research – understanding local market demand;
Zhengzhou Fude Machinery provides perfect introduction to the parameters of the equipment and answers all kinds of equipment questions for you.

The prev: Biomass charcoal machine

Related recommendations

aeroglide grain dryer
21/05/2024 828
The grain dryer is a hot air pulse dryer, also known as a hot air pipeline dryer. The advantages of this dryer are direct heating, fast drying, foldable installation, and space saving. An airflow dryer is a device that mixes moist raw mater...
View details
Sawdust Briquetting Machine
30/03/2025 67
Sawdust briquetting machine is a kind of equipment used to compress sawdust and other biomass raw materials into high-density fuel blocks, which is widely used in the field of biomass energy. The main function of sawdust briquetting...
View details
Carbonization furnace
14/05/2024 729
The principle of a carbonization furnace is to use the flue gas generated by internal combustion of materials for secondary heating and calcination, and the flue gas returns to the bottom for heating. During the carbonization process, the comb...
View details
barbecue charcoal machine
15/05/2024 614
The bbq charcoal machine is made by using sawdust to be compressed at high temperature through rod making equipment. This product has high density and good combustibility, and can replace firewood and coal. The general product has an outer ...
View details