Table of Contents

• Biomass sawdust particle production line
• What is a sawdust pellet machine production line?
• Configuration sheet for wood chip pellet machine production line
• Production process of wood chip pellet machine production line
• Customer usage effect of wood chip particle production line
• What are the factors that affect the price of sawdust pellet machines?

What is a sawdust pellet machine production line?

The sawdust particle production line is a mechanical equipment used to convert wood waste such as sawdust and sawdust into wood particle fuel.
It has the characteristics of high efficiency, energy conservation, environmental protection, and resource recycling, and plays an important role in the field of modern biomass fuels. The entire production line includes multiple equipment, such as raw material processing system, crushing equipment, drying equipment, pellet machine, cooling equipment, etc. These equipment work together to complete the production process of wood chips particles.

Configuration sheet for wood chip pellet machine production line

Fill the raw materials of biomass fibers such as tree branches, straw, peanut shells, tea seed shells, fruit shells, weeds, leaves, etc., crush them into powder within 10mm, dry them to a moisture content of less than 12%, put them into a rod making machine for high temperature and high pressure shaping (without any additives), and then put them into a carbonization furnace for carbonization, resulting in finished machine made charcoal. It is also possible to carbonize the material powder into carbon powder at high temperature without directly using a continuous carbonization furnace.

Production process of wood chip pellet machine production line

The production process of the sawdust particle production line includes raw material processing, particle production, particle screening, particle cooling, particle packaging, and other links. Firstly, the raw materials are sent to the crusher for crushing and then to the dryer for drying to achieve an appropriate moisture content. Next, the dried raw materials are sent to the granulator for compression into particles. After screening, cooling, packaging and other steps, the finished wood chips particles can be obtained.

Customer usage effect of wood chip particle production line

We have consulted and followed up with clients from Russia, Canada, the United States, the Netherlands, Indonesia, and other countries, and have been able to achieve satisfactory results in the use of the sawdust crusher pellet machine.

What are the factors that affect the price of sawdust pellet machines?

The hardness of the material. The harder the material, the greater the molding pressure required for granulation, and the more severe the wear and tear on the sawdust pellet machine equipment. The speed of granulation is slow, but of course, the granulation ability is small. This requires us to choose materials appropriately.
The composition of materials. The smaller the particle size of the material before granulation, the easier it is to granulation, because the smaller the particle size of these materials, the easier they are to be pressed into the mold hole by the pressing roller, and the denser the forming can be. Therefore, the particle size of materials should be minimized as much as possible during the early stage of material processing. Screen the coarse materials as much as possible from the materials to avoid affecting the normal operation of the sawdust pellet machine.
The moisture content of materials is an important factor affecting the granulation effect. The higher the moisture content, the worse the granulation of the material. The lower the moisture content, the better the granulation process. The specific manufacturer needs to recommend customized equipment for you based on your requirements for materials and discharge.